TES Teflon® Encapsulated Seals – OEM Replacement Plates & Rings for Nordson-Compatible Melters

Replacement Teflon® Encapsulated Silicone (TES) plates and ring seals integrate a resilient silicone core with a fluoropolymer (FEP or PFA) Teflon® outer layer to deliver outstanding chemical resistance, high‑temperature stability, and low friction for leak‑free performance in melt‑adhesive equipment. Designed for Nordson roll and barrel melters—including BM200, VD200, DD200, 5506, 5550, Durapail, Versapail, and 506 series—these replacement seals meet exact OEM dimensions and tolerances while offering significant cost savings.

platen-sesl-for-nordson-bulk-melters

Overview: TES Seals for Compatible with Nordson® Melters

What Are Teflon® Encapsulated Silicone (TES) Seals?

TES seals feature a core made of silicone (VMQ) or Viton® (FKM), fully enclosed in a thin Teflon® shell—either FEP or PFA. This hybrid design provides the elasticity of elastomers and the chemical inertness of Teflon®, delivering long-lasting sealing even under extreme thermal and chemical exposure.

Key Features of TES Seals

Chemical Inertness: Teflon® encapsulation is virtually impervious to most acids, bases, and solvents, preventing core exposure and seal failure.

Temperature Range: Effective from –60 °C to +200 °C (VMQ core) or higher with FKM/Viton® cores, maintaining seal integrity under continuous heat.

Low Friction & Non‑Stick: Smooth Teflon® outer surface minimizes wear and material buildup, reducing operating torque and sticking.

Compression Set Resistance: Encapsulation prevents extrusion and compression set, extending seal life under dynamic loads.

Which Nordson Models Are TES Seals Compatible With?

Our TES plates and ring seals are direct‑fit replacements for Nordson part numbers, including:

Platen Seals: 276977, 276985, 274380, 7140583 (5 Gallon)

Drum Melter Seals: Fits BM200, VD200, DD200, 5506, 5550 (55 Gallon)

Versapail & 506 Series: Includes service kits with TES seals and high‑temp grease

Learn more about Single seals and gaskets for hot melt systems.

Replacement-for-Hordson-276977-Bulk-Melter-Flaten-Sesl

OEM‑Quality & Customization

1. OEM‑Quality Replacement

Each TES seal is manufactured to match Nordson’s original specifications for dimensions, durometer, and tolerances, ensuring plug‑and‑play installation without modifications

2. Customization Options

Sizes & Cross‑Sections: Metric, imperial, rectangular, square, and Kamlock gasket designs available.

Core Materials: Silicone (VMQ), Viton® (FKM), EPDM, or specialty compounds.

Shell Options: FEP or PFA for enhanced chemical/temperature performance.

Performance & Cost Comparison

With thousands of hours of service life, easier clean‑up courtesy of the non‑stick shell, and up to 50 % lower total sealing costs versus OEM parts, TES replacements help reduce unplanned downtime and simplify maintenance, keeping your hot melt system running smoothly and cost‑effectively.

Compatible with OEM and Aftermarket Suppliers

Our TES Plate and Ring Seals are fully compatible with both Nordson OEM systems and a wide range of aftermarket Nordson seal replacements provided by:

Zentz Industrial
Astro Packaging
Universal Adhesive Systems
Radwell International

Frequently Asked Questions

Q1: Are these seals a direct replacement for Nordson OEM parts?
A: Yes, our TES Plate and Ring Seals are designed to meet the dimensions and performance of Nordson OEM components.

Q2: How long do TES seals typically last in melters?
A: Service life depends on temperature, adhesive type, and usage cycles. Under standard operating conditions, users can expect 6–12 months of reliable performance before replacement is needed.

Q3: Can these TES seals be reused after maintenance or cleaning?
A: We do not recommend reusing TES seals once removed. Their sealing performance may be compromised after thermal cycling or compression set.

Q4: What's the lead time for custom orders?
A: Custom sizes or materials typically require 10–15 business days, depending on complexity.

Ordering & Support

How to Order

1. Identify your Nordson part number or measure existing seal dimensions.

2. Email us at xhh@xhh-smartech.com with your part number or specifications.

3. Receive a competitive quote and lead time.

Ready to reduce downtime and cut sealing costs?

Disclaimer Statement:

Our products are compatible with Nordson® systems but are not original parts. Nordson® is a registered trademark of Nordson Corporation. We are not affiliated with, endorsed by, or sponsored by Nordson Corporation.

Posted in: Уплотнения для систем горячего расплава, О-кольца, комплект уплотнений Nordson