Latest posts

• 

  Replacement Part for Nordson® Pump Service Kit 105450

  Posted in: Dichtungen für Heißschmelzsysteme, Nordson Dichtungssatz

  855 Views

  In hot melt adhesive systems, the piston pump is the core of the melter. Once the pump seal wears out, output becomes unstable, leakage increases and unplanned downtime becomes more frequent. The OEM Nordson® pump service kit 105450 is widely referenced as a “Pump A seal kit / pump seal kit” for hot melt piston pumps. XHH Seals manufactures a compatible replacement kit, cross-referenced to 105450, to help maintenance teams rebuild their pumps in a cost-effective way. Note: 105450 is an OEM...

  Read more
• 

  PolyPak vs U-Cup Seal: Which One Is Better for Hydraulic Applications?

  Posted in: Hydraulikzylinder-Dichtungen

  695 Views

  Quick Answer If you are evaluating rod or piston seals for a hydraulic cylinder, the decision depends on your system's pressure dynamics and reliability requirements:For superior low-pressure sealing & vacuum conditions: Choose PolyPak seals. For high-stability under pressure fluctuations & shock loads: Choose PolyPak seals. For cost-sensitive, simple pneumatic or steady low-pressure systems: Choose U-cup seals.Engineering Consensus: In the majority of heavy-duty hydraulic...

  Read more
• 

  PolyPak Seal: Complete Guide to Structure, Materials and Selection

  Posted in: Hydraulikzylinder-Dichtungen

  630 Views

  What Is a PolyPak Seal A PolyPak seal is a composite hydraulic seal consisting of:A polyurethane (PU) sealing lip An elastomer O-ring energizer (NBR or FKM)It is widely used in hydraulic cylinders for both rod sealing and piston sealing applications. In engineering terms, it is also called:O-ring energized lip seal Composite hydraulic sealPolyPak Seal Structure & Working Principle Structure A typical PolyPak seal includes:Outer sealing element: PU lip Inner energizer: O-ring...

  Read more
• 

  GRACO MD2 Rebuild Kit Replacement (255218, 255219, 255220): OEM Cross Reference & Cost-Effective Alternatives

  Posted in: Dosier- und Abgabesysteme,

  499 Views

  Are you still sourcing original GRACO MD2 rebuild kits dealing with high costs and unpredictable lead times? For many maintenance teams and procurement managers, OEM kits such as the 255218, 255219, and 255220 present significant operational challenges:High Procurement Cost: Inflated OEM pricing that drains maintenance budgets. Limited Availability: Supply chain delays causing unacceptable production downtime. No Flexibility: Fixed material options that may not be optimized for your...

  Read more
• 

  Ultimate Guide to Krones-Compatible Sealing Solutions: Materials, Design & Cross-Reference (2026)

  Posted in: Dichtungen für Heißschmelzsysteme,

  233 Views

  Beverage plant engineers face two realities when maintaining Krones filling and packaging lines: exorbitant OEM markups and unacceptable lead times. Sourcing replacement seals is not about finding matching dimensions; it is about engineering material upgrades that survive extreme Clean-in-Place (CIP) and Sterilization-in-Place (SIP) cycles. 1. The CIP/SIP Challenge: Material Science Upgrades Repeated exposure to 130°C steam and aggressive CIP chemicals (NaOH, HNO3) destroys standard...

  Read more
• 

  Spring Energized Seals for Food Fillers: A Technical Guide to Carbon-Fiber, UPE & PTFE Material Selection

  Posted in: Federbelastete Dichtungen,

  89 Views

  Seal failure accounts for over 60% of unscheduled downtime in food and beverage filling lines. This guide compares three spring energized seal materials—Virgin PTFE, Carbon-Filled PTFE, and UHMW-PE (UPE)—across CIP/SIP resistance, wear rate, pressure limits, and FDA compliance, so you can select the right seal for your specific filling application. 1. Why Standard O-Rings Fail in CIP/SIP Food Filling Lines In food filling operations (dairy, juices, sauces), seal degradation is typically...

  Read more