Replacement Guide Ring 4-012-01-0234 | Fits Homag Edgebander Cylinder 48.8×45.7×4.9mm

We are a professional manufacturer of sealing rings and provide reliable OEM-quality alternatives to Homag and other CNC machine components. Our replacement O-rings and sealing solutions are fully compatible with parts supplied by RicoCNC and other sources.

Common references:

4-012-01-0234 O-ring / F2 Seal Ring

4012010234 Guide Ring / Wear Ring

O-ring seal for F2 edgebanding cylinder

O-ring 48.8 × 45.7 × 4.9mm for Homag KL / KFL / Ambition

We also offer the following compatible seal ring models:

4-012-01-0607 – Piston Sealing Ring 28×22.4×3.8

4-012-01-0617 – Piston Sealing Ring 30×22.7×3.8

4-012-01-0030 – Sealing Ring 16×24×3

4-012-01-0124 – O-ring 16×22×3

4-012-01-0018 – O-ring SD 19×27×4

4-012-01-0607 – O-ring 28×22.4×3.8

4-012-02-0425 O ring

4-012-02-0053 Ring 28,30X1,78 Viton

4-012-02-0056 – O-ring VITON 8.00×2.50

3-602-04-0070 – O-ring Brandt glue shaft

4-012-01-0368 – O-ring 15×21×3

4-012-06-0045 – O-ring Homag Cross-section sealing ring 8.2×11.76×1.78

4-012-02-0166 – O-ring 40.00×2.50 VITON

4-012-02-0301 – O-ring 16.00×1.50 VITON

If you are looking for reliable sealing solutions for Homag machinery, contact us at xhh@xhh-smartech.com or request a quote now.

Disclaimer:

All product and company names are trademarks™ or registered® trademarks of their respective holders. Any use of brand names, model numbers, part numbers or descriptions is for identification and compatibility purposes only.

XHH Seals is an independent manufacturer and is not affiliated with Homag®, Brandt®, IMA®, RicoCNC, or any other OEM. The seals and components offered on this website are aftermarket replacements designed to meet or exceed OEM specifications.